SAPPHIRE 600 UV-VIS Variable Wavelength DETECTOR
Programmable wavelength change 190 up to 600 nm
- Description
- Parameters
SAPPHIRE 600 UV-VIS Variable Wavelength DETECTOR
is a detector with continuously variable wavelength in the range of 190 – 600 nm and a noise level ± 0.5 x 10-5 AU.
The unit may be used for routine analytical chromatography as well as for preparative chromatography, according to the selected cell.
The unit is easy to operate, reference and sample signals are available for detector diagnostics as well as information on lamp operating hours.
Output signal is available in both digital and analogue form on the output connector. It is possible to control the unit using the keypad or an RS232 interface Connecting capillaries are led from the detector’s right side panel.
The detector is equipped with a high standard deuterium lamp in a special socket that enables easy changing. Wavelength can be programmatically changed during the performance of an analysis. The detector performs automatic wavelength calibration after the lamp has been switched on. A cell is included as a component of the detector
USED CELLS
Standard analytical measuring cell HPLC 04 supplied with the unit
| volume | 10 µl |
| optical path | 5 mm |
| diameters of capillaries | input 1/ 16“ x 0,2mm ; output 1/ 16“ x 0,5 mm |
MLCC 02 Microcell (optional)
| volume | 0,5 µl |
| optical path | 0,8 mm |
| diameters of capillaries | input 1/ 16“ x 0,2mm output 1/ 16“ x 0,2 mm |
PLCC 04/05 Preparative cell (optional)
| volume | (adjustable) 45 μl; 55 μl; 70 μl |
| optical path | (adjustable)0.3 mm; 1.4 mm; 2.4 mm |
| Connecting of PLCC 04 | SS capillaries 1/16" x 1,0mm |
| Connecting of PLCC 05 | FEP 1/8“ x 1/16“ |
| Accuracy of adjustment | ± 1 nm |
|---|---|
| Typical spectral half-width | 6 nm |
| Reproducibility | ± 0.5 nm |
| Light source | Deuterium discharge lamp |
| Output for integrator | 1 V/AU |
| Time constant (T90) | Fast, middle and slow |
| Communication | RS232 |
| Power supply | 100, 115 and 230, 50/ 60 Hz) |
| Power input | 80 VA |
| Noise level at empty cell (254 nm, TC 1 s) | ± 0,5 x 10-5 AU |
| Drift at empty cell (254 nm after 1 h) | 1x 10-4 AU/hr |
| Materials in contact with mobile phase | PTFE; fused silica, stainless steel, Vespel, PEEK |
| Programming | 3 change of wavelength during analysis |
| Adjustable offset | ± 50 mV |
| Dimensions W x H x D | 220 x 170 x 450 mm |
| Weight | 11 kg |
ECOM is a global supplier of scientific and laboratory instruments for liquid chromatography. The company was established in October 1991 and it is focused on research, development, and manufacturing of scientific and laboratory equipment for liquid chromatography. Our innovative R&D and dynamic processes allow us to quickly react on customer’s needs and to propose customised products and solutions. ECOM’s focus on high quality products and responsive service supports high performance of its customers.
About Us
