ECD2800 UV-VIS Detector CE

190-800

These detectors with wavelength in the range of  190 - 800nm. They are derived from basic type ECD2600 /ECD2800. They are originally designed for use in capillary electrophoresis (CE).

Availability
Manufacturer
ECOM spol. s r.o.
Part number
ADACE00X

Newly developed cell enables easy installation of quartz capillaries and minimizes interference by ambient light as well as mechanical shocks. The light is brought into the cell using optical fiber, which is focused in the center of quartz capillary for electrophoresis.

Detector is easy to operate, light intensities for reference and measuring channel are available for easy detector diagnostics as well as information about lamp operating hours. The detector performs automatic wavelength calibration after lamp start. High standard deuterium lamp in a special socket enables easy lamp exchange.

Output signal is available in both digital and analogue form. Detector can be controlled, programmed and used together with Clarity or ECOMAC software via RS232 or Ethernet interface.

 

Communication RS232
Ethernet (LAN)
Accuracy of adjustment ± 1 nm
Reproducibility ± 0.5 nm
Light source Deuterium + Halogen lamps
Noise (Test cell, 254nm, TC 2s, 10 Hz) ± 10 x 10-6 AU
Drift (Test cell, 254nm) 1·10-4 AU/hr.
Time constant 20 – 10 000 ms
Sampling speed up to 100 Hz
Digital output 1 V/AU
Analog output 1x configurable
Wetted materials depend on a cell – fused silica, PTFE, stainless steel, PEEK
Communication RS232,Ethernet (LAN)
Display, keypad VFD 140x32 pixels, 10 pushbuttons
Power supply 100-240V 50/60Hz 100VA
Dimensions W x H x D 280 x 135 x 498 mm (11.02 x 5.12 x 18.23 in)
Weight 9 kg (19.8 lb)
Filename Type
Info-ECD2800_CE_detector-cz pdf (171,74 KB)
Info-ECD2600CE_ECD2800CE_detector-en pdf (173,46 KB)
Manual-ECD2000-cz pdf (2,21 MB)
Manual-ECD2000-en pdf (2,47 MB)